HALLOWEEN WINE GLASS CANDLE HOLDERS

halloween wine glassessm

HALLOWEEN WINE GLASSES (CANDLE HOLDERS)

large group halloween wine glasses

Materials Used: Dollar Store Wine Glasses, Glitter Blast Spray Paint HERE , Felt, craft foam for witch hat, find Straw hats for scarecrow HERE (aff), Sharpie (black and red), Cheese Cloth or Similar material, Rafia, Hot glue and Hot glue gun, and Misc. embellishments. (looking for the glitter spray CLICK HERE for where I purchase mine)

Directions: Make sure your glasses are clean then simply spray them with the glitter spray and let dry for 24 hours. Once dry you can embellish them any way you want to, I used things I had around the house.
Find a very basic template for the felt pieces—> halloween template

NOTE: When spraying these you must treat it like any spray paint, you need to do it in coats and spray at a slight distance, if you get to close or spay too much in one spot at a time then the paint/ glitter can run. Shake the can VERY well before spraying to mix the glitter, this also helps to keep the can from clogging. If you live in a cold/ damp climate you need to take caution when spraying it may not tack up if its too cold out (you can spray them in a garage or somewhere warmer to help, but be careful of over spray in this case).
NOTE: These are for decoration purpose only, not meant for actual food use.

 
 

 
halloween wine glassessm
 

This post contains affiliate links

This post contains affiliate links

Terms of Use, Privacy Policy, Disclosure, Disclaimer