Snowman Wine Glass Candle Holder

SNOWGIRLS

Snowman Wine Glass Candle Holder

 

 (looking for the glitter spray CLICK HERE for where I purchase mine)

 Make sure your glasses are clean then simply spray them with the glitter spray and let dry for 24 hours. Once dry you can embellish them any way you want. I cut out some mittens from felt, attached with a hot glue gun, along with a bow and snowflake. For the cheeks I simply did a quick spray of posh pink over the white. The face was drawn on with a sharpie and white dots placed in the eyes with a white paint pen.

NOTE: When spraying these you must treat it like any spray paint, you need to do it in coats and spray at a slight distance, if you get to close or spay too much in one spot at a time then the paint/ glitter can run. Shake the can VERY well before spraying to mix the glitter, this also helps to keep the can from clogging. If you live in a cold/ damp climate you need to take caution when spraying it may not tack up if its too cold out (you can spray them in a garage or somewhere warmer to help, but be careful of over spray in this case).

 

These are so much fun because the possibilities are endless! you can do anything you want and make any character you want. Just need some glitter spray and away you go!

 IF YOU LIKE THESE MAKE SURE TO CHECK OUT MY OTHER WINEGLASS CREATIONS HERE

 

 
 
This post contains affiliate links

Terms of Use, Privacy Policy, Disclosure, Disclaimer

8 Comments

  1. Pamela Bagdonas

    These are cute, I do them as well but look so very different. I tend to use whatever I have to make and totally different look. Such a strick budget but love making different things.

    Reply
  2. Jessica

    What did you use for drawing the face on?

    Reply
    1. Sheena (Post author)

      Hi there, I used a basic Sharpie and for the eyes and I used a white paint pen to add the twinkle to them.

      Reply
  3. Bonnie

    These are adorable, I am going to attempt for Christmas presents in different themes. What did you do the carrot with?

    Reply
    1. Sheena (Post author)

      Hi there, I used orange felt for the carrot nose 🙂

      Reply
    2. Bonnie

      Did you spray a sealant on them? If so, before or after you did the face?

      Reply
  4. Vonnie

    Do you spray the stem (red) first then the bottom. They are blended so well where the colors meet.

    Reply
    1. Sheena (Post author)

      Hi there, I spray the main part of the glass first and then the stem (feathering the red or blue down and slightly over the white glitter). I try and spray a lighter coat the closer I get to the white to help it blend 🙂

      Reply

Leave a Comment

Your email address will not be published. Required fields are marked *