Patriotic Wine Glasses (Candle Holders)
Directions: Make sure your glasses are clean then simply spray them with the glitter spray and let dry for 24 hours. For the white on the patriotic glasses I sprayed the inside of the glass with white first and then masked off the areas such as the starts and the white stripes on the outside then sprayed the blue and red on the outside. I used star stickers to mask off the star area and a low tack tape for the stripes. Once dry you can embellish them any way you want to.
NOTE: When spraying these you must treat it like any spray paint, you need to do it in coats and spray at a slight distance, if you get to close or spay too much in one spot at a time then the paint/ glitter can run. If you live in a cold/ damp climate you need to take caution when spraying it may not tack up if its too cold out (you can spray them in a garage or somewhere warmer to help, but be careful of over spray in this case).
NOTE: These are for decoration purpose only, not meant for actual food use.