WEDDING ELEGANCE WINE GLASS CANDLE HOLDERS

weddingsm

wedding

WEDDING ELEGANCE WINE GLASS CANDLE HOLDERS 

Materials Used: Dollar Store Wine Glasses, Glitter Blast Spray Paint (Diamond Dust, Silver, and Starry Night),Hot glue and Hot glue gun, ribbon, flowers and misc. embellishments

(looking for the glitter spray CLICK HERE for where I purchase mine)

Directions: Make sure your glasses are clean then simply spray them with the glitter spray and let dry for 24 hours. Once dry you can embellish them any way you want to, I used things I had around the house.

Two Color Look: Start by spraying the inside of the glass with one color (Black) once dry take and cut out of paper the desired shapes (wet the paper and lay on the glass, over the color area you are wanting to mask off) while the paper is damp it sticks to the glass long enough to spray your other color over top, once dry you can easily removed the paper and the masked off color underneath will show through.


NOTE: When spraying these you must treat it like any spray paint, you need to do it in coats and spray at a slight distance, if you get to close or spay too much in one spot at a time then the paint/ glitter can run. Shake the can VERY well before spraying to mix the glitter, this also helps to keep the can from clogging. If you live in a cold/ damp climate you need to take caution when spraying it may not tack up if its too cold out (you can spray them in a garage or somewhere warmer to help, but be careful of over spray in this case).

Note: These are for decoration purpose only, not meant for actual food use.

 IF YOU LIKE THESE MAKE SURE TO CHECK OUT MY OTHER WINE GLASS CREATIONS HERE

wedding2

wedding1

wedding

This post contains affiliate links

Terms of Use, Privacy Policy, Disclosure, Disclaimer

4 Comments

  1. Jennifer

    Love these!! I did make my own. I have to say that painting the inside of the groom was challenging. I waved to share a trick that saved my sanity: after painting it there were still spots that we’re not completely painted, so after it was dry, I took black acrylic paint and painted over the glitter paint. I started out just doing the unfinished parts, but liked the way it looked so much that I did all of the inside. The glitter still shows perfectly, but there are no white spots. They will look awesome for my wedding!! This is the second set I’ve done from your collection. Thanks so much!!!

    Reply
    1. Sheena (Post author)

      Thank you so much hun, using the black paint is a great idea! When I make these I usually do several coats allowing the paint to dry between each coat until the inside is completely covered. Using the paint over top would save a lot of time and money! I am so glad to hear that you like the ideas and have had great luck in creating your own 🙂

      Reply
  2. Abby

    So I just want to clarify, since I’m not a very crafty person. For the groom, you paint the inside with the starry night first, then block off all but a triangle and the stem and paint that on the outside? So there’s no black paint outside?

    Reply
    1. Sheena (Post author)

      Yes that is exactly correct 🙂

      Reply

Leave a Comment

Your email address will not be published. Required fields are marked *